EM1230 Oscilloscope 功能簡介

本示波表是一款集25MHz數字存儲示波器和6000計數的真有效值數字萬用表功能為一體的適合現場測試、維護、檢修使用的多功能手持式工具儀表.

● 2通道數字存儲示波器，100MSa/s的實時采樣率，25MHz的實時帶寬.
● 6000計數的真有效值數字萬用表.
● 自動跟蹤測量: 根據外部輸入信號全自動跟蹤調節垂直幅度\水平時基檔位和觸發，無需人工干預.
● 大動態示波測量范圍 ：無需擴展探頭，直接測量范圍可從10mV/div至500V/div.
● 多參數屏幕顯示，使用者可根據需要選擇有效值、峰峰值、平均值、頻率、周期等10多種參數.
● 單、雙兩種光標測量模式選擇.
● 320x240點TFT液晶顯示，內置電池供電，交直流兩用.
● 記錄儀功能, 可連續跟蹤記錄長達24小時的事件.
● 標配USB接口、通過PC軟件可方便的與計算機通信，進行數據分析和測試結果歸檔.

規格參數

Horizontal
Bandwidth: DC-25MHz (-3dB)
Channel Number: 2
Raise Time: 14 ns
Sampling Rate: 100MSa/s
Horizontal Sensitivity: 10ns/div - 5s/div,With 1-2-5 Steps
Horizontal Precision: 0.01% + 1 Pixel

Vertical
Vertical Sensitivity: 10mV/div - 500V/div,With 1-2-5 Steps
Vertical Precision: ± (3% + 1 pixel)
Vertical Resolution: 8 Bit
Maximum Input Voltage: DC or AC 600Vrms
Coupling: AC,DC
Input impedance: 1MΩ≤20pF

Trigger
Trigger Source: CHA,CHB,External trigger
Trigger Mode: Normal, Auto, Single
Trigger Sensitivity: ≤1.0div
Trigger slope: Rising or falling edge of waveform
Trigger Coupling: AC,DC

DC(V): 600mV/ 6V/ 60V/ 600V/1000V
AC(V): 600mV/ 6V/ 60V/ 600V/1000V
DC(A): Reference the accuracy of current probe(optional)
AC(A): Reference the accuracy of current probe(optional)
OHM: 600Ω/6KΩ/60KΩ/6006KΩ/6MΩ/60MΩ
CAP: 6nF\60nF\600nF\6uF\60uF\600uF\6mF
Diode: ≤2V
On/Off Test: Lower5 Ω,Beep

Communication: USB PC
Display: 320×240 pixels; LED backlight
Dimensions: 212×121×50mm
Weight: Approx. 700g

附件